New energy Hi-pot Fuse Tube

New energy Hi-pot Fuse Tube

Product Name:New energy Hi-pot Fuse Tube

Hits:22248  

Product Description:

Eidoll Sales the  The new  energy Hi-pot current fuse,Bellow are the specification:

一、5*20mm Hi-pot specification as bellow:


1.MODEL  NUMBER  AND  SAFETY  CERTIFICATION

·

Model  Number:  Part  Number+Rated Current+Rated Voltage+Approvals.
example:
5CH          1A     1000V                   1)  Part  Number
2)Rated  Current
1)           2)    3)                         3)Rated  Voltage
1-2 Rated Current  And  Voltage
Rated Current: 63mA~1
Rated  Voltage: 500V/600V/1000V AC/DC
1-3Marking
The fuse shall have the following marking:
Specification:Characteristic  Symbol+Rated Voltage
63mA~800mA : _mA500V/600V/1KV    1A~1:_A500V/600V/1KV
Trade mark:The Manufacture’s Logo+Part Number+Approvals
63mA~1:

Note:Size of the markings have not be specified.
2.SCOPE
Used in electronic equipment.
3.OUTLINE DRAWING AND STRUCTURE
3-1 Outline Drawing and Dimensions(Unit:mm)

3-2Structure

No.

Component

Material

Quantity

(1)

Wire

Alloy

1

(2)

Cap

Brass with mickel plated

2

(3)

Body

CERAMIC Tube

1

(4)

Lead

Tinned Copper wire

2


4.APPEARANCES AND CONFIGURATION
4-1Appearances:There shall no fragmentation and of remarkable blotch.
4-2Configuration:Axial Leaded Fuse.

5.PHYSICAL CHARACTERISTIC
5-1 Tensile test
Keep pulling the cap of the fuse with 10N at axial direction for 1 min.

6.ELECTRICAL CHARACTERISTICS
Pre-Arcing Time/Current Characteristic
a、Breaking capacity(Time Lag and Fast Acting)

15000A

500/600V/1KV/3KV

AC/DC


b、Electrical characteristics

Time Lag(CCC/VDE)

RATED CURRENT

2.1IN

2.75IN

4IN

10IN


32mA to 100mA

Max.

Min.

Max.

Min.

Max.

Min.

Max.

30 min.

1S

80S

95mS

5S

10mS

100mS

大于100mA

30 min.

1S

80S

150mS

5S

20mS

100mS

Fast Acting

RATED CURRET

2.1IN

2.75IN

4IN

10IN


大于50mA

Max.

Min.

Max.

Min.

Max.

Max.

30 min

10ms

2S

3ms

300ms

20ms

UL

Rated current

1IN

1.35IN

2IN

MIN

MAX

MAX

63mA~1

4Hrs

1hr

5Sec


c、Temperature character
When 100% of rating the temperature rise doesn’t exceed 75℃.

d、Approvals

Catalogue number

Rated current

Voltage


5CFP/5CTP

63mA~1

500/600V/1KV


7. ENVIRONMENTAL SPECIFICATION
7-1 Operating Temperature: -5℃~60℃
7-2 Storage Conditions
Temperature: +10℃~60℃
On average, It can be stored below the relative humidity or 75% for 3 years.
Without dew, It can be kept under humidity of 95% for 30 days.

8.SOLDERING PAAMETERS
8-1Wave Solder
Soldering Temperature:260±5℃
Soldering Time:4 Sec.Max.
8-2Manual Solder
Soldering Temperature: 350±5℃
Soldering Time: 3 Sec. Max.
OTHER NOTICE IN USING
If heat shrink tubing was needed,the roast temperature and time should be refer to the following.
The temperature should be sel under 150℃,roast time:50s Max.

二、 6.35*32mm the specification of Hi-pot current fuse as bellow:


635*32mm Hi-pot current fuse the specifications as below,:

1.MODEL  NUMBER  AND  SAFETY  CERTIFICATION

1-1 Model  Number:  Part  Number+Rated Current+Rated Voltage+Approvals.

example:

6CFUP      10A    500V                    1)Part  Number

2)Rated  Current

1 2 3 3)Rated  Voltage

1-2 Rated Current  And  Voltage

Rated Current: 63mA~30A

Rated  Voltage: 500V/600V AC/DC

1-3Marking

The fuse shall have the following marking:

Specification:Characteristic  Symbol+Rated Voltage

63mA~800mA : _mA250V/500V    1A~30A:_A250V/500V

Trade mark:The Manufacture’s Logo+Part Number+Approvals

63mA~30A:

Note:Size of the markings have not be specified.

2.SCOPE

Used in electronic equipment.

3.OUTLINE DRAWING AND STRUCTURE

3-1 Outline Drawing and Dimensions(Unit:mm)


3-2Structure

No.

Component

Material

Quantity

(1)

Wire

Alloy

1

(2)

Cap

Brass with mickel plated

2

(3)

Body

CERAMIC Tube

1

(4)

Lead

Tinned Copper wire

2

4.APPEARANCES AND CONFIGURATION

4-1Appearances:There shall no fragmentation and of remarkable blotch.

4-2Configuration:Axial Leaded Fuse.

5.PHYSICAL CHARACTERISTIC

5-1 Tensile test

Keep pulling the cap of the fuse with 10N at axial direction for 1 min.

6.ELECTRICAL CHARACTERISTICS

Pre-Arcing Time/Current Characteristic

aBreaking capacity(Time Lag and Fast Acting)

1000KA

500V

AC/DC

bElectrical characteristics

Fast Acting(refer to UL)

Rated current

135%

200%

63mA~30A

Max.

Max.

1 hour

120 sec

cTemperature character

When 100% of rating the temperature rise doesn’t exceed 75.

dApprovals

Catalogue number

Rated current

Voltage

refer to CQC,UL

6CFUP

63mA~30A

250V/500V


7.ENVIRONMENTAL SPECIFICATION

7-1 Operating Temperature: -5~60

7-2 Storage Conditions

Temperature: +10~60

On average, It can be stored below the relative humidity or 75% for 3 years.

Without dew, It can be kept under humidity of 95% for 30 days.

8.SOLDERING PAAMETERS

8-1Wave Solder

Soldering Temperature:260±5

Soldering Time:4 Sec.Max.

8-2Manual Solder

Soldering Temperature: 350±5

Soldering Time: 3 Sec. Max.

9.OTHER NOTICE IN USING

If heat shrink tubing was needed,the roast temperature and time should be refer to the following.

The temperature should be sel under 150,roast time:50s Max.

三、10*38mm the spefication of Hi-pot current as bellow:


1.MODEL  NUMBER  AND  SAFETY  CERTIFICATION

·       Model  Number:  Part  Number+Rated Current+Rated Voltage+Approvals.

[example]:
10HCU      40A     500V                   1)Part  Number
2) Rated  Current
1)               2)      3)                     3)  Rated  Voltage
1-2 Rated Current  And  Voltage
Rated Current: 100mA~50A
Rated  Voltage:125V/250V~1000V AC
1-3Marking
The fuse shall have the following marking:
Specification:Characteristic  Symbol+Rated Voltage
100mA~800mA : _mA500V    1A~50A:_A500V
Trade mark:The Manufacture’s Logo+Part Number+Approvals

100mA~500A:

Note:Size of the markings have not be specified.
2.SCOPE
Used in electronic equipment.
3.OUTLINE DRAWING AND STRUCTURE
3-1 Outline Drawing and Dimensions(Unit:mm)

3-2Structure

No.

Component

Material

Quantity

(1)

Wire

Alloy

1

(2)

Cap

Brass with mickel plated

2

(3)

Body

CERAMIC Tube

1



4.APPEARANCES AND CONFIGURATION
4-1Appearances:There shall no fragmentation and of remarkable blotch.
4-2Configuration:Axial Leaded Fuse.
5.PHYSICAL CHARACTERISTIC
5-1 Tensile test
Keep pulling the cap of the fuse with 10N at axial direction for 1 min.
6.ELECTRICAL CHARACTERISTICS
Pre-Arcing Time/Current Characteristic
a、Electrical characteristics
Fast Acting

Rated current

135%

200%


100mA~50A

Max.

Max.

1 hour

120 sec

b、Temperature character
When 100% of rating the temperature rise doesn’t exceed 75℃.

7.ENVIRONMENTAL SPECIFICATION
7-1 Operating Temperature: -5℃~60℃
7-2 Storage Conditions
Temperature: +10℃~60℃
On average, It can be stored below the relative humidity or 75% for 3 years.
Without dew, It can be kept under humidity of 95% for 30 days.

8.OTHER NOTICE IN USING
If heat shrink tubing was needed,the roast temperature and time should be refer to the following.
The temperature should be sel under 150℃,roast time:50s Max.








Home | About Us | Products | News | Feedback | Contact Us |
Eidoll Electronics Co., Ltd. Ltd. 2020 All rights reserved

Copyright 2020 Auto Parts All Right Reserved

粤ICP备:粤10219780号-2